Category: Atlas Transfer Case

The Advance Adapters Atlas 4 speed has essentially two parts. The first is the reduction housing This housing holds a 6 gear planetary assembly that has a low range of 2.72:1 and a 1:1 in high range. We use a planetary assembly that was originally run in a NP241-HD transfer case. This assembly has been rated to withstand 5,555 ft/lb of torque and up to 11,000 lbs gross vehicle weight.
The second part of the 4 speed may look the same as the standard 2 speed Atlas, but it does have some differences. The main case of the 4 speed is the same raw casting, but has some machining variations to make it into a 4 speed. The main case functions independently from the front reduction housing and retains all of the normal Atlas features.
When all this is put together, you get a new legendary Atlas transfer case with the best combination of gear ratios ( 1:1, 2.0:1, 2.7:1 & 5.4:1 ) or ( 1.1, 2.7:1, 3.8:1 & 10.3:1 ).
The Atlas 2 speed and 4 speed transfer cases is sure to bring you the utmost in dependability and performance with the best warranty in the industry. The Atlas transfer cases are guaranteed against defects in workmanship and materials for the life of the original purchaser. This lifetime guarantee covers and is limited to gear sets and castings. The remainder of the unit is covered by their limited 1 year warranty.

 

The Advance Adapters Atlas gear-driven transfer cases are the ultimate in gearing and strength. With over 9000 units sold, the Atlas 2 speed is the solution for combining both on and offroad performance. The Atlas II from Advance Adapters offers a solid, one- piece case design and is manufactured from 356 T-6 heat treated aluminum alloy. The massive gears are helical cut and synchro-equipped for “shift-on-the-fly” capability. These gears are available in six different low range ratios (2.0:1, 3.0:1, 3.8:1, 4.3:1, 5.0:1, 6.0:1) and are supported by needle bearings, precision matched to 8620 shafts. The 32 spline 1 3/8” output shafts are supported by large taper bearing sets. The Atlas also features a unique twin stick design that offers multiple shift positions for neutral, 2wd high,4wd high,2wd low (rear), 4wd low, 2wd low (front).*front dig*
The Atlas 2 speed and 4 speed transfer cases is sure to bring you the utmost in dependability and performance with the best warranty in the industry. The Atlas transfer cases are guaranteed against defects in workmanship and materials for the life of the original purchaser. This lifetime guarantee covers and is limited to gear sets and castings. The remainder of the unit is covered by their limited 1 year warranty.

 

Fits: V6 Nissan Pathfinder 88-95, V6 Nissan Hardbody, V6 Xterra / Frontier Pre-05.
The Advance Adapters Atlas 4 speed has essentially two parts. The first is the reduction housing This housing holds a 6 gear planetary assembly that has a low range of 2.72:1 and a 1:1 in high range. We use a planetary assembly that was originally run in a NP241-HD transfer case. This assembly has been rated to withstand 5,555 ft/lb of torque and up to 11,000 lbs gross vehicle weight.
The second part of the 4 speed may look the same as the standard 2 speed Atlas, but it does have some differences. The main case of the 4 speed is the same raw casting, but has some machining variations to make it into a 4 speed. The main case functions independently from the front reduction housing and retains all of the normal Atlas features.
When all this is put together, you get a new legendary Atlas transfer case with the best combination of gear ratios ( 1:1, 2.0:1, 2.7:1 & 5.4:1 ) or ( 1.1, 2.7:1, 3.8:1 & 10.3:1 ).
The Atlas 2 speed and 4 speed transfer cases is sure to bring you the utmost in dependability and performance with the best warranty in the industry. The Atlas transfer cases are guaranteed against defects in workmanship and materials for the life of the original purchaser. This lifetime guarantee covers and is limited to gear sets and castings. The remainder of the unit is covered by their limited 1 year warranty.