Over the last few months we’ve been slowly making progress on the solid Axle Nissan pathfinder project which is now using a h233b diamond axle fabricated housing and Dana 60 steering. The Suspension is just about done and this thing should be on the trail again in the next few weeks! Check out for info on the solid axle swap pathfinder project in the forum at HTTP://forum.ruggedrocks.com!
5% Off Until August 1, 2010 – Code: 981234
Using Discount Code:981234 during online checkout will get you 5% OFF any non-sale items site wide until August 1, 2010.
Trail Gear – Rock-AssaultTSteering Pump Kit 1979 – 1995 Toyota 4cyl 4wd motors
The stock Toyota pump is just barley able to supply the volume and pressure needed to run Hydraulic assist steering. The stock pump puts out 1,300 psi @ one gallon per minute. The stock pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low RPM's. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. The Trail-Gear Rock-AssaultTM pump puts out 1,600 psi of pressure at 4 gallons per minute. This provides the full fluid volume your steering box and ram are looking for, even at an idle. Pump kit includes pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, & hardware. Pump kit is designed to work with stock or ram drilled IFS power steering boxes. Application Notes: This pump and bracket is designed to fit all Toyota 4cyl 4wd motors from 1979 – 1995. A large power steering fluid cooler (included) is required on the low pressure side of the system. Pump bracket works in conjunction with stock idler bracket. If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gear box with one designed for use with power steering. The stock fan belt will not work with this pump and will need to be replaced with Napa # 9440 belt. Belt is included with kit.
