Category: Steering

A pull scale is helpful in setting up the shims on a knuckle. By increasing the shims above and below the knuckle the knuckle becomes tighter. When installing new knuckle bearings we recommend checking the shims with a pull scale. Attach the pull scale on the steering arm with the tie rod / drag link removed and the felt on the back side of the knuckle not yet installed. The knuckle should not move until about 15 lbs of force is applied to the steering arm.

 

This system is a new, complete replacement set designed to correct the chronic problem of a worn idler arm and center drag link. The system includes a new precision machined Pitman & Idler Arm assemblies from billet 4140 heat treated alloy. The new idler arm rides on full replacement 3/4&#34 pivot bracket using a much enlarged friction surface a durable Bronze bushing. Bracing the new idler arm to the vehicle is a fully incorporated idler arm brace that strengthens the entire unit. Also included in the system is a completely new Center Drag Link made from 1 1/8&#34 x .250&#34 wall thick DOM tubing. The center drag link uses beefy off the shelf 11/16&#34 McQuay Norris tie-rod ends for maximum strength and durability. The Center Drag Link is completely rebuildable and parts can be purchased from us directly. Lastly, the kit includes new replacement tubular tie rod adjustment links that due to the system&#39s change in configuration, are longer than stock. This added length helps reduce bump steer angle over stock. This system is simple, durable, completely serviceable, and requires no modification to stock parts or vehicle. Intended for both on and off-road use. The entire kit is finished in Zinc 1 silver plating for the ultimate in durability.

 

Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure Forged from 8620 tool steel, these arms are incredibly strong. Because we make them in lots of 1,000 at a time we can offer these at a great low price! All mounting surfaces are machined including the split washer surface and the tie rod tapered holes, ensuring correct and positive contact between parts, preventing knuckle studs and tie rod ends from coming loose. Arms are angle compensated so that the rod ends ride at the factory designed 90 degree angle.  Fits 1979 – 1985 Toyota pickup and 4Runner. Also fits 1979 and later Land Cruisers with spring over conversion. No questions asked, lifetime warranty. Knuckle and steering arms sold separately.