Nissan 4×4 & Off Road Parts Blog
The latest Nissan 4×4 Events & Products
Our six stud high steer kit includes left and right six stud steering arms, tie rod, drag link, four rod ends and your choice of flat or curved pitman arm. To use this kit you will also need an IFS style steering box, box mount, and four additional knuckle studs & hardware. Fits 1979-1985 Toyota Pickup and 4Runner solid front axles.
The stock Toyota pump is just barley able to supply the volume and pressure needed to run Hydraulic assist steering. The stock pump puts out 1,300 psi @ one gallon per minute. The stock pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low RPM's. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. The Trail-Gear Rock-AssaultTM pump puts out 1,600 psi of pressure at 4 gallons per minute. This provides the full fluid volume your steering box and ram are looking for, even at an idle. Pump kit includes pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, & hardware. Pump kit is designed to work with stock or ram drilled IFS power steering boxes. Application Notes: This pump and bracket is designed to fit all Toyota 4cyl 4wd motors from 1979 – 1995. A large power steering fluid cooler (included) is required on the low pressure side of the system. Pump bracket works in conjunction with stock idler bracket. If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gear box with one designed for use with power steering. The stock fan belt will not work with this pump and will need to be replaced with Napa # 9440 belt. Belt is included with kit.
If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. This frame mount kit includes both inner and outer frame reinforcing plates, grade 8 bolts, DOM tubing, and Crimp nuts. Inner plate is 1/4, outer plate is 3/16". Angled leading and trailing edges prevent frame cracking. Heavy duty design. No questions asked, lifetime warranty.