The TX10A to D300 Doubler by North West Fab allows you to keep the low gears of your stock TX-10A transfercase and add a Dana 300, Atlas or Stak Transfercase behind it. This will, at very minimum, double your crawl ratio. The final crawl ratio will depend on what gearing options are used in both the TX10 and the added transfer-case.
*Compatible with with Calmini Crawler gears.
*Available with a 23 or 31 spline output.
*Fits all 4cyl & V6 Nissan Pathfinder, Hardbody, Xterra, Frontier 4×4’s from 1986 to 2004 with a manually shifted transfercase.
Buy now here: http://ruggedrocksoffroad.com/tx10a-to-d300-transfer-case-doubler-by-north-west-fab-p-35998.html
If you have any questions regarding this product feel free to call 909-547-4651 or e-mail us via the contact us page.
Atlas 4SP & 2SP Transfer cases & Nissan Adapters
With the new Atlas 4SP Transfer cases slated to start shipping in late April, There is no doubt that there will be a gearing option to fit your needs in your Pre-’05 V6 Nissan 4×4 to replace the factory tx-10 transfer case with the appropriate adapter. This redesigned Atlas 4SP has an additional 2 gearing options over the previous version offering 5.44:1, 8.16:1, 10.34:1, 11.7:1 Ratios.
The original Atlas 2SP Is also still available and can be fitted to most V6 & V8 4×4 Nissan trucks and SUV’s from 1986 – Present. The atlas 2SP has the following gearing options: 2:1, 3:1, 4.3:1, 5:1. Both the Atlas 4SP Transfer case and the 2SP are twin stick transfer cases enabling independent engagement of the front and rear outputs and enabling the user you perform a ‘front dig’. For more information on fitting an atlas transfer case to your Nissan 4×4, click: Nissan 4×4 Atlas Transfer Case or call us at 909-547-4651.
Currently there aren’t any Atlas adapters available to fit 4cyl. Nissan 4×4’s but it is something that we’re looking at doing in the very near future. If this is something that you’re interested in, please contact us.
Dual TX10 Nissan Transfer Case Adapter
Marks 4wd is willing to make a tx10 verison of there tx12 (patrol tcase).
“Thank you for your email & interest in our products. The dual transfer case kit we do for the Patrol’s will not suit the TX10 transfer case. Although they look similar they are different internally. We could look at doing a kit to suit your transfers but we would need a minimum order or 10 plus 50% deposit up front
We are looking at keeping the cost the same as the Nissan Patrol dual adaptor. Kit would have same components, adaptor, shaft, & bearing. You would need to do a shifter set up for your rigs . AUD $ = $927.27 US depending on exchange rate approx US$725 based on .78cents. Shipping not included in price
Keep in touch & let us know how you go. Time frame would be approx 6-10 weeks as we have to have patterns made for the adaptor etc “