Easily replace your factory 33-spline axle shafts with Chromoly upgrade versions to protect against breakage with oversize tires and deep gearing.
Estimated cost is in the $450 range for the pair.
If you are interested in this concept product, please let us know via the comment box below. Please include the Year and Model of your Vehicle.
if you get them, i will buy them.
These are great, but I need 31-spline shafts in Frontier/X width. I have ’99/early ’00 H233B shafts in my rig (same diameter as HB 31-spline, but longer for the wider housing). Any chance we could see these?
Deffinatly interested in these. I have an 04 that i just put a h233b in with 4.9’s and a welded carrier so axleshafts will probably be the first thing i break, if i break.
i would buy these, if they were the xterra/frontier width 31-spline. it would be even better if they were the x/fronty width, 31 spline, and be compatable with pathfinder disc brakes.
you should also try to develop a full floater kit for the h233b. i would porbably buy that in a heartbeat
I’d be interested in these if you also accompanied the upgrade with a disk brake conversion.
You build them and I will buy them! I have a spare 4.9 H233B and Im going to lock it up.. These would be a nice addition!
I’m very interested and know other thats would be too
Would we be able to get these drilled to a different lug pattern instead of 6 on 5.5?
So is this still a possibility?
Hmm Im interested in this concept but it sounds like it never got off the ground.